Sandalias Enix V3 EGS

Enix Sandal V3

The Enix V3 is a trail sandal that has been designed on the paths and steep roads of the mountains. The lower part that has to deal with the stones is a Vibram plate, with a firm density and a multidirectional taqueado, aggressive and with an extraordinary traction quality. On this basis, there is 5 mm of EVA of medium density that gives the whole the necessary comfort and flexibility. As footbed, our new EGS, a non-slip synthetic material that improves the traction of the foot on the sandal in both dry and wet.

The Enix closure has been improved, having disappeared the lower knot of the sandal, thus protecting the stretch of cord from rubbing and the erosion of the stones. The EnixV3 are the extension of the EnixV, and are ideal for mountain races with technical terrain and long distance.

In addition, the new metal clasp on the sole protects the toe strap. Further increasing its durability.

Characteristics of the sandal B3

• Sole: Vibram Claw 5 mm + Medium density EVA 5 mm
• ENIX® closure: 20mm PES high resistance tubular tape, metal clasp and black velcro cord
• Footbed: the part where the foot rests is formed by what Enix calls EGS (EnixGripSolution). It is a material composed of a polymer of high resistance to abrasion, which through its fibers allows the absorption and evacuation of liquid (both sweat and water). In dry, its small furrows between fibers causes the foot to remain firm when exerting pressure on it and in case of sweating, it is absorbed by the new lining. In the wet, its fabric is able to absorb and evacuate excess water allowing a firm and controlled footprint at any time. Its fixation to the sandal is made by a complex system of gluing, which allows it to adhere to the iron in an incredible way, maintaining the flexibility of the sandal at all times
• Weight (size 9): 140 grams
• To tie the sandal, read the following information.
• To choose the size measure your foot and use the following table:

How to clean your Enix

• Clean them with water, neutral soap, and a soft brush.

• If they smell bad, apply a bit of Sanytol after cleaning.

• This disinfectant eliminates the bacteria that cause the odor.

• Let them air dry, never in direct sunlight.

• Repeat the process as needed. Keeping them clean helps your Enix last longer!